Concept visualization: A stone Tudor at night with warm white lights along its eaves.

Track and mounting

The mount plays a big part in how your lights look during the day. This is what holds them to your home, in the closest color we have to your trim.

Track, brackets and covers

Free QuoteSee the specsSend this to someone

Mounting, up close

Warm white

These close-ups and houses are concept visualizations of how the lights can look.

Standard PolytrackAluminum trackDouble deep trackCustom mountingWhite trackBrown trackBlack trackGray trackSand trackWhite trimCream trimGray trimBrown trimGreen trimBlack trim

Jump to

See it against your trim

Pick your trim and a track. This is the look by day, when the lights are off and all you see is the track.

Which track
Track color
Your trim

A discreet mount for compatible Pebble lights.

An upgraded mount for the Standard Pebble package, with a refined finish.

A deeper track for Pebbles behind a fascia that drops below the soffit.

Special brackets, custom fabrication, unusual mounting or extra finishing, for a home that needs it.

Colors on a screen are only a guide. We use the closest color we have to your trim, and it shows more on trim that contrasts with it. If you’d like a specialty finish or a custom color, we can talk about it when we look at your house.

Our own drawing of an eave by day, not a photograph.

Lights off, lights on

Concept visualization: The same farmhouse with its outdoor lights off, the track hard to see along the trim.Concept visualization: A white farmhouse with a wraparound porch and a barn at night, warm white lights along its rooflines.

How the lights sit in the track

The track is a slim U-channel along your roofline. A Pebble’s long side runs along the channel, with its LEDs facing out of the open side.

123

Standard Pebble

A Standard Pebble sits down inside the channel, for the most discreet line.

Track about 1.25 in (31.8 mm) wide and 0.75 in (19.1 mm) deep. Body 0.5 in (12.7 mm) deep.

123

Deep Pebble

A Deep Pebble is taller, so it sits past the lip of the track and you see the light from three sides.

Track about 1.25 in (31.8 mm) wide and 0.75 in (19.1 mm) deep. Body 0.875 in (22.2 mm) deep.

  1. The track, in the closest color we have to your trim.
  2. The Pebble, a clear shell around a small circuit board.
  3. Two LEDs, facing out of the open side.
  4. A flat 4-wire cable, passing straight through each light.
  5. Covers snap in between the lights to hide the wire and connectors, so the run reads as one strip with a small clear window at each light.
A drawing, to scale. The track’s size is approximate.

Where the track goes

Where it goes changes how your lights look at night, so we choose it on purpose.

  • Pointing out

    On the fascia or drip edge, or on a bracket under the gutter with the track clipped to it.

    At night you see a crisp row of separate dots tracing your roofline.

  • Pointing down

    Under the soffit, or on the underside of the gutter.

    You still see the dots, and each one throws a scalloped pool of light down the top of the wall.

  • Flat roof or storefront

    On a bracket along the top of the parapet with the track clipped on, or in a track on the parapet’s face.

    You get a clean line of light along the top of the building.

Our own drawings of where the track goes, and what you’d see from the street.

What holds your lights, by day and by night

A slim line of track along the trim by day, and by night the light is what you notice.

Concept visualization: A yellow garrison colonial at night with warm white lights along its eaves.

The track types

Which one fits depends on the light and your trim.

  • Standard Polytrack

    A discreet mount for compatible Pebble lights. It comes in white, brown, black, gray and sand, and we use the closest color to your trim.

  • Aluminum track upgrade

    An upgraded mount for the Standard Pebble package, with a refined finish and the same clean look.

  • Double deep track upgrade

    More mounting choices for selected lights. We’ll help you work out which track suits your lights and your home.

  • Custom mounting and finishing

    Some homes need special brackets, custom fabrication, unusual mounting or extra finishing. We’ll look at what yours needs and put our recommendations in your quote.

Full specifications

The numbers come from published product details. Some track sizes are approximate.

Standard Polytrack

The track

Material
UV-coated PVC U-channel
Size
About 1.25 × 0.75 in (31.8 × 19.1 mm)
Sections
3 ft (0.91 m) long, cut to fit
Gap between sections
About 0.125 in (3.2 mm)The small gap gives the track room to move with the weather, so it doesn’t warp.
Colors
White, black, brown, gray or sand
Fits
Deep and Standard Pebbles

Aluminum track

The track

Material
Aluminum
Size
1 × 0.75 in (25.4 × 19.1 mm)
Sections
4 ft (1.22 m) long
Colors
White, oyster white, beige, grey beige, terra brown, telegrey 1 or black

Double deep track

The track

Size
1.25 × 1 in (31.8 × 25.4 mm)
Made for
Pebbles behind a fascia that drops below the soffit

Custom mounting

What it can be

Base bracket
A PVC strip with a rounded bead. The track clips to the bead, which turns the lights 90°
Also
Special brackets, custom fabrication, unusual mounting or extra finishing

Covers

Covers snap in between the lights to hide the wire and connectors. The maker says they help with HOA rules and deter critters from chewing the cable.

For 12 in (305 mm) spacing
9.75 in (248 mm)
For 6 in (152 mm) spacing
3.88 in (98.6 mm)
For 15 in (381 mm) spacing
13 in (330 mm)
Full lengths
3 ft (0.91 m)

Our lights are made by Minleon-Rainmin, a lighting manufacturer since 2005.

Questions

How noticeable are the lights during the day?

We design each installation to blend with your home’s architecture as closely as possible. Most people will likely prefer a color-matched track that complements their fascia, soffits or exterior trim, and we offer different mounting and track options depending on what you prefer and the lights you choose.

See the track styles

Do you offer aluminum tracks?

Yes, aluminum tracks are durable, attractive and competitively priced, and we match their finish to your trim as closely as we can. We also offer compatible polymer tracks where the lights or the layout you choose call for them.

Can you match the track to my home’s trim?

Yes, we use the closest track color we have to your trim. Standard colors are white, brown, black, gray and sand. If you’d like a specialty finish or a custom color, we can talk about it when we look at your house.

Can you install permanent lighting on a home with a complicated roofline?

Yes, many homes with dormers, several roof levels and lots of corners can take permanent lighting. A more complicated job may need extra mounting materials, equipment or labor. We’ll look at your house and quote the work it involves.

Will I see the wire?

No, covers snap in between the lights to hide the wire and connectors.

Which track do I need?

It depends on your lights and your home, because track compatibility varies by light. We’ll help you work out which one suits them.

Can you install permanent lighting when you replace my roof?

Yes, we’re part of a roofing company, so we can coordinate your roof and your lights together. You work with one team that understands both.

Keep exploring

Lights that go with these

Ideas that use them

Concept visualization: A navy colonial with a red door at night, cool white lights along its rooflines.

Now picture your house.

Send us your details and a photo of your house, and we’ll come back with a free quote.

Free QuoteSee options and financing

Or text us at 603-945-1112.