
Pearl lights
Pearls are small oval lights on a molded clip, with no track. They’re often used on commercial buildings.
Clip-mounted light, 2 × 1.25 × 1 in (50.8 × 31.8 × 25.4 mm)
Pearls, up close
These close-ups and houses are concept visualizations of how the lights can look.
PearlClip mountedRed, green and blue12 in apart6 in apart4 in apartTeam colorsChristmas colors
Build your look
Pick how close together they sit and what colors they run. The picture and the line under it follow along.


We’ll help you work out the spacing that suits your building.
The buildings are concept visualizations. The row of lights below them is our own drawing.
At a glance
- No track
- A molded clip on the back snaps onto a base strip, so there’s no channel along the building.
- Three LEDs
- Three LEDs behind a clear oval lens, in red, green and blue.
- Each on its own
- Each light can be its own color, so color can move along the building.
- A backup data line
- The +2 means a 4-wire cable with a backup data line, so one failed light doesn’t knock out the ones after it.
For a storefront or a main street
Storefronts, restaurants and office buildings get the same plan and the same care as a house.

The light itself
Our own drawing, to scale. A clear oval lens with a black molded clip on the back.
Pearl
Where a Pearl goes
The clip snaps onto a base strip, which goes where the building gives us a clean line.
Flat roof or storefront
On a bracket along the top of the parapet with the track clipped on, or in a track on the parapet’s face.
You get a clean line of light along the top of the building.
Pointing out
On the fascia or drip edge, or on a bracket under the gutter with the track clipped to it.
At night you see a crisp row of separate dots tracing your roofline.
Our own drawings of where the track goes, and what you’d see from the street.
What comes with it
Looking for something truly unique? We also offer light bars, bullet pixels, mini lights, Pearls, 360° Pebbles and closer-spaced Pebbles, and we’ll help you work out a design.
These go in with a compatible installation. Some may need separate controllers, power supplies, extended wiring, trenching or structural supports, and we’ll list those in your proposal.
If your home needs extra equipment or electrical work, we’ll list it in your quote. These are our own drawings, not photographs. What affects the cost
Flexible financing available. All financing is subject to approval and lender terms. See options and financing
Full specifications
Every number here comes from the maker’s data sheet, dated at the bottom.
Pearl
The light
- Colors
- Red, green and blue
- LEDs
- 3 in each light
- Lens
- Clear oval, on a black molded clip
- Control
- Each light on its ownEach light can be its own color, which is what lets color move along your roofline.
Size
- Body
- 2 × 1.25 × 1 in (50.8 × 31.8 × 25.4 mm)Length, width and depth.
Spacing and runs
- Spacing
- 12 in (305 mm), 6 in (152 mm) or 4 in (102 mm)
- Before adding power
- About 225 lights, or about 225 ft (69 m)Long rooflines stay on one system. We add power as your home needs it.
Wiring and power
- Power
- 24 V DCLow voltage, fed by the power supplies we fit for your home.
- Draw
- 0.4 W per light
- Cable
- 4-wire, with a backup data lineThis is the +2: a backup data line, so one failed light doesn’t knock out the ones after it.
How it mounts
- Mount
- Molded clip that snaps onto a base strip, with no track
Ratings
- Water and dust
- IP66Dust-tight, and it resists powerful jets of water.
- Made to stay up
- Year-round for 10 years or more, according to the manufacturer
- Warranty
- 3-year workmanship warranty, on our professional installation. 10-year manufacturer’s warranty, on the lighting products, subject to the manufacturer’s terms.
Source: Minleon Pearl data sheet, November 2021. Model RGB+2-PRL. Open the data sheet (PDF)
Which one is right for me?
A Pearl is one good answer for a commercial building. Here’s how it compares.
| Light | Suits | Colors | How it mounts | Size |
|---|---|---|---|---|
| Pearl | Commercial buildings, where a clip suits better than a track. | Red, green and blue | Molded clip that snaps onto a base strip, with no track | 2 × 1.25 × 1 in (50.8 × 31.8 × 25.4 mm) |
| Standard Pebble | A discreet line in a track, with warm white as an option. | Red, green and blue, with warm white as an option | PVC track, in 3 ft (0.91 m) sections, or a 2-screw adjustable clip | 1.75 × 0.75 × 0.5 in (44.5 × 19.1 × 12.7 mm) |
| Deep Pebble | Warm white as well as color, and light you can see from three sides. | Red, green, blue and warm white | PVC track, in 3 ft (0.91 m) sections | 2.5 × 0.625 × 0.875 in (63.5 × 15.9 × 22.2 mm) |
| 360° Pebble | Commercial drip edges, where a building is seen from both sides. | Red, green and blue | Molded clip, for a commercial drip edge | Ask us |
Our lights are made by Minleon-Rainmin, a lighting manufacturer since 2005.
Questions
Can Pearls do warm white?
Not on the maker’s sheet, which lists red, green and blue. If warm white matters most for your building, ask us and we’ll point you to a light that has it.
Why would I pick a Pearl over a Pebble?
A Pearl clips onto a base strip with no track, which can suit a commercial building. A Pebble sits in a track, and our RGBW+2 Pebbles have a true warm white. We’ll help you weigh the two.
Do you light businesses too?
Yes, we install permanent lighting for businesses, town buildings and other public places as well as homes. Tell us about your building and we’ll talk through what would work.
Keep exploring
Lights that go with these
- Pebbles Small capsule lights that sit in a slim track along your roofline.
- Specialty For ideas a standard roofline can’t do.
- Mounting The mount plays a big part in how your lights look during the day.
- Controls and Power What runs it all.
Ideas that use them

Now picture your house.
Send us your details and a photo of your house, and we’ll come back with a free quote.

